Removing an Old Fence for a Fresh Installation

Many ageing fences may not necessarily collapse completely. Instead, they often lean over time until a panel detaches during a storm, indicating an immediate need for replacement.

Once you have arranged for a new fence installation, it’s vital to remove the existing fence and dispose of it appropriately—a task frequently overlooked until the last minute. This guide outlines key considerations to address before dismantling the old panels.

Engage in Fence Removal Discussions with Your Neighbour

If the fence marks a boundary between properties, it’s crucial to discuss the removal with your neighbour. This conversation aids in avoiding potential disputes later on.

In New South Wales, the Dividing Fences Act 1991 specifies how neighbours can share costs related to a dividing fence and the procedure for reaching an agreement. NSW Fair Trading offers clear guidance on this subject, including steps to follow if consensus cannot be achieved. Familiarising yourself with this information before removing the old fence can help prevent awkward discussions later.

Clarify key points such as the timeline for fence removal, the duration the boundary will remain exposed, and the division of costs. A simple conversation beforehand can avert misunderstandings and complications.

Comprehending the Old Fence Removal Procedure

The specifics of fence removal depend significantly on the construction type.

Timber paling fences generally come apart in a systematic manner. Initially, the palings are removed, followed by the rails, and finally, the posts. While the palings can be taken off swiftly, the posts may pose challenges due to their typical concrete anchoring.

Colorbond fences can be dismantled more rapidly, but they can be unwieldy to manage. Although the sheets detach easily from the rails, they are long, have sharp edges, and do not stack neatly. Similar to timber fences, the posts are usually set in concrete.

Older boundary fences may comprise different materials, including chain wire on steel posts, timber lattice over a low brick base, and occasionally durable hardwood. The material type influences both the duration of the removal process and the associated costs.

Deciding on Posts and Footings Prior to Removal

This decision should be made before removal, as it significantly impacts the fencer’s work more than your own.

Concreted posts can either be excavated with their footings attached, resulting in a series of holes along the boundary, or they can be cut off at ground level, leaving the footings intact. The choice hinges on where the new fence posts will be positioned. If the new fence aligns with the existing line, the buried footings could complicate the fencer’s task on their first day.

Consulting with the fencer about their preference before scheduling the removal is advisable. They will likely provide a clear recommendation, and a quick phone call can prevent complications when they arrive to start work.

Essential Checks Before Dismantling the Old Fence

Certain older boundary and side fences in Sydney may not be constructed from timber or steel. Instead, they could consist of flat grey fibre cement sheeting, often affixed to steel posts, and in some instances, this material may contain asbestos.

If the fence resembles flat sheeting rather than palings or Colorbond, it’s imperative to halt any demolition efforts until you can accurately identify the material. SafeWork NSW and your local council provide resources for recognising these materials and information regarding licensed handlers. This is not a decision to rush during a weekend project; proper identification and understanding of correct procedures are essential.

Properly Managing Old Fence Timber After Removal

Fence materials can be categorised distinctly. Steel posts, Colorbond sheeting, and chain wire form one category, while timber constitutes another. Concrete footings are treated separately.

It’s vital to emphasise that treated pine, commonly used in modern fencing, should never be burned. Burning treated timber releases harmful preservatives into the smoke and ash, rendering it unsuitable for fire pits, wood heaters, or backyard bonfires. While old fence palings may appear to be a free source of firewood, they are unsafe to burn.

In contrast, hardwood palings from genuinely old fences can be valuable if you have a specific use in mind. If you wish to retain some for future projects, please communicate this preference before the job begins.

What Other Items Will Be Cleared Alongside the Old Fence?

A fence line rarely remains free of debris. Vegetation that has grown alongside the fence and items that have been stored against it often accumulate over time.

• Vegetation along the fence line: creeping plants, overgrown shrubs, and roots that may have contributed to the fence leaning.
• Timber offcuts and old palings: remnants from previous repairs, often leaning against nearby structures.
• Pots and garden edging: items that have remained beside the fence and have not been relocated.
• Old outdoor furniture and equipment: items that have been hidden out of sight along that side of the yard.
• Green waste from clearing the area: this is necessary for the fencer to work efficiently and generates its own waste load.

To ensure the fence line is fully prepared for the new installation, consolidating all debris into one load optimises the use of the truck and eases the fencer’s arrival.

Preparing for the Gap Between the Old and New Fence

It’s crucial to prepare for this gap, as it can unexpectedly catch homeowners off guard.

During the interval between the removal of the old fence and the installation of the new one, the boundary will be exposed. If you have dogs, small children, or a pool in your yard, it is essential to have a plan in place before removal rather than scrambling afterward. Temporary fencing, securing pets indoors, or timing the removal to coincide with the fencer’s arrival are all effective strategies. Lacking a plan can lead to complications.

If a pool is present, remember that pool barrier regulations remain applicable even when the boundary fence is down. If the boundary fence is part of the pool barrier, consult your certifier before any removal occurs.

Arranging Old Fence Removal Services in Sydney

Our fence removal services are part of our comprehensive backyard demolition and junk removal offerings, with debris and cuttings from the fence removal transported in the same vehicle under green waste removal.

When you reach out to us, please provide details about the fence: the approximate length in metres, whether it is timber, Colorbond, or wire, if the posts are concreted, and any additional items that need to be removed alongside that side of the yard. If a fencer has already scheduled a start date, mention this, as coordinating the removal with this date can streamline the process.

Consider two additional resources: the differences between council hard waste and private junk removal, which can be useful before placing fence timber on the kerb, and the comparison between skip bags and skip bins if you prefer to dismantle the fence yourself over a weekend.

Frequently Asked Questions About Old Fence Removal

Should You Remove the Old Fence Before the Fencer Arrives?

In most instances, yes. Most fencers prefer a cleared boundary, allowing them to start setting up on their first day rather than spending valuable time tearing down and stacking the old fence. Consult your fencer to clarify their preferences, as some include removal in their services while others do not, which may determine whether you need our assistance.

Can You Remove the Concrete Footings from the Old Fence Posts?

Yes, the footings can be removed alongside the posts, leaving holes in the ground, or the posts can be cut off at ground level, leaving the footings intact. The best option depends on the placement of the new posts, so consult with the fencer first and relay their advice before we begin work.

Is Neighbour’s Consent Required for Removing a Dividing Fence?

Since a dividing fence affects both properties, it is important to discuss the matter with your neighbour rather than making unilateral decisions. The Dividing Fences Act 1991 specifies how neighbours in New South Wales can agree on and share costs associated with a dividing fence. Ensure this matter is settled before scheduling the removal.

Can I Keep the Old Palings for Firewood?

Not if they are treated pine, which constitutes the majority of modern palings. Burning treated timber is unsafe as it releases harmful preservatives into the smoke and ash. older hardwood palings are a different matter. If you wish to keep some, please inform us before the job begins, and we will set aside a stack for you.

What Other Items Can Be Cleared Alongside the Fence?

The entire area alongside the fence can be cleared as needed. The fence line typically contains overgrown vegetation, old timber leaning against it, and various items stored out of sight. Since the boundary must be cleared for the fencer, consolidating everything into one load is a more efficient use of the truck than scheduling separate removals.